BEBOB COCO-VENICE
7.015 lei
BEBOB COCO-VENICE is used to power a Sony VENICE or VENICE 2 camera using a bebob B-mount battery and maintain hot-swapping capability. The mount supports failover between mains and battery power to maintain the safety of your equipment using the 4-pin XLR output cable and 3-pin input. The adapter mounts onto the camera’s V-mount, and it supports a total 20A continuous draw and 12/24V unregulated output.
Disponibil pentru precomandă
BEBOB COCO-VENICE is used to power a Sony VENICE or VENICE 2 camera using a bebob B-mount battery and maintain hot-swapping capability. The mount supports failover between mains and battery power to maintain the safety of your equipment using the 4-pin XLR output cable and 3-pin input. The adapter mounts onto the camera’s V-mount, and it supports a total 20A continuous draw and 12/24V unregulated output.
On the side of the plate are two Twist D-Tap outputs that support up to 14.4V/2.5A and two USB-A outputs that support 5V/1A. Around the adapter, there are also three 5-13V/1A Hirose outputs, three 12V/2A 2-pin LEMO-type outputs, and one 3-pin Fischer power output to power a variety of accessories.
Specs
Power Input: B-Mount: 24 VDC
Maximum Load: 20 A (Peak)
Power Output: D-Tap: 14 VDC at 2.5 A
USB-A: 5 VDC at 1 A
Hirose 4-Pin: 13 VDC at 1 A
Hirose 4-Pin: 8.4 VDC at 1 A
Hirose 4-Pin: 5 VDC at 1 A
LEMO 2-Pin: 12 VDC at 2 A
Fischer 3-Pin: 28.8 to 33.6 VDC
XLR 4-Pin Male: 34 VDC
Inputs/Outputs: 2x D-Tap
2x USB-A
3x Hirose 4-Pin
3x LEMO 2-Pin Female
1x XLR 3-Pin Female
1x XLR 4-Pin Male
Plate Front / Battery Mount: B-Mount
Plate Rear Mount: V-Mount Battery Plate
Number of Battery Bays: 1
Hot-Swap Support: Yes
Material of Construction: Aluminum
Dimensions: 5.7 x 4.6 x 2.9″ / 144 x 117 x 72.5 mm
Weight: 27.7 oz / 785 g